2 ports Parallel PCI card RC304
User Manual
2 ports Parallel PCI card RC304
User Manual
Driver Installation
Windows 95/98/2000
Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board and
attempt to install driver for it.
1. Start Windows 95/98/2000
2. The“Update Device driver Wizard” will
appear, informing you that it has found a “PCI
I/O Card”. Click the “Next” button.
3. Click “Other Location” for Windows 95 or
“Specify a location” for Windows 98 to
install the driver.
4
2 ports Parallel PCI card RC304
User Manual
4. Insert the driver CD in CD-ROM drive(D) and
click on the “Browse” button.
5. at the “Browse” option, select “CD-ROM(D)
FOLDER
“PCI_I/O\NM97X5\WIN9X”
“OK” button
6. The “Update Device Driver Wizard” will
appear, informing you that it has found the
“NetMos PCI I/O Card” driver. Click the
“Next” button.
7. Follow the instructions to finish up the drive
installation.
.
8. Once Windows 9x has restarted, you can now
connect your external devices to the PCI I/O
card install the driver for the external devices,
please refer to the external device user
manual.
.
5
2 ports Parallel PCI card RC304
User Manual
Windows NT 4.0
Using the existing hard disk controller in your system, you need to install the ATA/100 driver into
Windows NT first. Without ATA/100 driver support, hard drive attached to the ATA/100 IDE controller
card can not boot up Windows NT.
Installing drivers with existing Windows NT 4.0:
Make sure Windows NT 4.0 is properly installed into your system first.
Step 1: Start Windows NT 4.0.
Step 2: Insert Driver CD into the CD-ROM drive.
Step 3: Select “Run” option in Windows NT.
Step 4: At the “Run” option, click on the “Browse” button.
Step 5: At the Browse for Folder window:
1. Select “CD-ROM Drive (D)”
2. Select NetMosMultiIODrivers.exe
3. Click on the Open button
Step 6: Finally, click the “OK” button
Step 7: Follow the instruction to finish the driver installation. Your system will automatically restart in
order to complete the driver installation.
Installing DOS Driver
Copy “D:\PCI_IO\NM97X5\DOS\NMDOSIN.EXE ” to your hard disk and run it.
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com/ for complete warranty information and future support for
your product.
6
|
Radio Shack Intercom System 43 222B User Guide
Radio Shack Network Card 273 328 User Guide
Renesas Network Card R0E001000EXT00 User Guide
Ruckus Wireless Network Card MM2211 User Guide
Ryobi Saw R10633 User Guide
Samsung Headphones BN68 01171B 03 User Guide
Samsung TV Video Accessories CYSTC1100ZA User Guide
SanDisk Network Card Type I II PCI e Interface Cards User Guide
Sansui CRT Television HDLCD2650 User Guide
Scag Power Equipment Lawn Mower SW36 BJ User Guide